How to eliminate common faults in sand blasting machines?
The automatic sand blasting machine uses compressed air as the power to spray the sand or spray material on the surface of the product in the form of high-speed spraying, so as to achieve the effect of correcting the surface of the workpiece and changing the appearance quality of the product. This kind of equipment will inevitably have some minor faults when using it. Let's learn how to troubleshoot it.
1. The problem often seen is that a large amount of abrasive enters the vacuum bag, causing the automatic sand blasting machine to malfunction. The reason for this is that the abrasive is too thin or the suction bag opening is too large. The solution is to use a coarser abrasive or to close the opening of the vacuum bag.
2, the more common and more serious situation is that the abrasive sprayed by the sand blasting machine is uneven, resulting in the appearance quality of the workpiece is reduced. This may be due to too little abrasive, or blocked nozzles, or low air pressure. When this happens, you must first check which cause is caused, and then the right medicine, the problem can be solved.
If you use this kind of equipment for a long time, it will inevitably have various faults. If there is a fault, you must first find out the cause of the fault, and then solve it according to your own ability. If you can't solve it yourself, ask a professional to repair it. So as not to cause serious consequences.